Pre-assembled cables and screw terminals for easy connection of your CNC machine and peripherals

15 pole screw terminal LC version

Sub-D connector: Sub-D male

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter, the input and output signals can be wired easily and professionally. The connection adapter can be screwed directly to the control and the signals can be tapped at the numbered terminals.The connection adapters are available either as SubD male and female connector.

€14.00*

15 pole screw terminal for DIN rail mounting

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 15-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

€32.00*

15-pin pre-assembled Sub-D connection cable

Sub-D connector: Sub-D Male/Male

Sub-D connection cable for connecting the CNC controller to the CNC electronics. The length is 1.8m. The connection cables are optionally available with Sub-D plug/plug or Sub-D plug/socket.

Content: 2 Meter (€5.60* / 1 Meter)

Variants from €8.63*

€11.20*

25 pole screw terminal for DIN rail mounting

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

€35.00*

25 pole screw terminal LC version

Sub-D connector: Sub-D female

€16.00*

25-poliges vorkonfektioniertes Sub-D-Anschlusskabel

Sub-D connector: Sub-D Male/Female

Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.

Content: 1.8 Meter (€4.79* / 1 Meter)

Variants from €6.40*

€8.63*

CAT6A patch cable 3m for ncNET and NET2COM

Copper conductor (CU), halogen-free cable sheath (LSZH), 3m blue. Our CAT cables transmit signals in maximum quality at extreme speed and ensure a stable connection. Our connection cables and plugs are characterized by high-quality inner conductors, robust cable sheathing and precisely fitting plugs. Compatible with WinPC-NC USB with nc100 or SC100C adapter. Double-shielded LAN cable with 2x RJ45 connections for connecting network components CAT 6A network cable suitable for 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s S/FTP overall shielding: aluminum foil shielding for individual wire pairs (PiMF) and aluminum braided shielding for the cable jacket High-quality copper conductor (CU) and 3µ gold-plated contact surfaces guarantee an excellent, high-performance network connection. Anti-kink sleeve and robust sheathing provide optimum protection for the Ethernet cable against cable breakage. Latching lug protection on the RJ45 plug prevents the latching lug from snagging or breaking off to ensure a reliable Internet connection. Internet cable is CAT 6A-tested (incl. measurement protocol) and suitable for Power over Ethernet (PoE, PoE+).

Content: 3 Meter (€1.43* / 1 Meter)

€4.29*

ncNET Mounting Adapter

The mounting adapter for the ncNET module allows the module to be attached to a din rail / mounting rail or mounting plate. The adapter is robust and stable. Thanks to the precise design, the module is locked in the adapter and cannot be moved. The mounting brackets used for the mounting rail hold firmly on the mounting rail so that installation is possible without end brackets. The mounting brackets can also be removed and the module can be attached to a mounting plate using the adapter and 4 holes. You can find the right adapter for the ncUSB module here.

€33.00*

ncUSB Mounting Adapter

The mounting adapter for the ncUSB module allows the module to be attached to a din rail / mounting rail or mounting plate. The adapter is robust and stable. Thanks to the precise design, the module is locked in the adapter and cannot be moved. The mounting brackets used for the mounting rail hold firmly on the mounting rail so that installation is possible without end brackets. The mounting brackets can also be removed and the module can be attached to a mounting plate using the adapter and 4 holes. You can find the right adapter for the ncNET module here.

€31.00*

Stepper motor connection cable for StepMAX or CNCMAX

Motor cables need to meet certain requirements to ensure safe and correct operation. Therefore, we recommend our motor cables for connecting your stepper motors to a StepMAX or CNCMAX controller. As the motor cable is delivered in one piece and as a running meter and is not pre-assembled, these motor cables can also be used for other controllers or applications. For longer motor cables, please order the appropriate number. We supply a SubD connector and the appropriate housing for soldering the motor cables with each meter of motor cable. This means that the motor cables can be firmly screwed to the control unit and connected to the connection cables of the stepper motor at the other end.

€5.00*

USB 2.0 cable 3m for nc100 / SC100C

USB 2.0 Hi-Speed cable, black 3m. USB 2.0 plug (type A) to USB 2.0 micro plug (type B). Compatible with WinPC-NC USB with nc100 or SC100C adapter.

Content: 3 Meter (€0.73* / 1 Meter)

€2.19*

USB 2.0 cable 3m for ncUSB / SC100B

USB 2.0 Hi-Speed cable, transparent 3m. USB 2.0 plug (type A) to USB 2.0 plug (type B). Compatible with ncUSB module, SC100B and Hammer USB module.

Content: 3 Meter (€1.00* / 1 Meter)

€2.99*