Remote controls and handwheels for easy setup of your CNC machine with WinPC-NC

The handwheel HR-10 is perfect for operating your machine via WinPC-NC. The housing is made of robust plastic and fits very well in the hand. In addition, it has a non-slip rubber cover. The handwheel is controlled via the USB interface on the PC. For this purpose, the handwheel HR-10 has an integrated 3m long USB cable.The handwheel HR-10 supports the following functions:Selection of all 4 axes with displayVery precise positioning by rotary encoder with 100 divisionStep-by-step movement with adjustable distanceContinuous movement as long as rotation is in progressSpecial speed mode with variable speedStart/stop of loaded jobsSave and approach zero pointsSpindle and cooling on/offSpeed and spindle override with potentiometer during jobThe info sheet for the handwheel HR-10 can be downloaded here.The handwheel HR-10 can be used with all WinPC-NC  variants from versions 2.5 or higher.

The HR-20 handwheel is equipped with a replaceable 3 m cable and USB plug. With the new, more ergonomic housing, the HR-20 fits even better in the hand and can be perfectly stowed away on the CNC machine with the retaining bracket. The axes are conveniently controlled on the HR-20 via a rotary switch. The handwheel is automatically integrated by Windows and only needs to be activated in the WinPC-NC parameters under Basic Settings-interface. Start today and experience a new dimension of machine operation with WinPC-NC and the HR-20 handwheel. The HR-20 handwheel supports the following functions: Selection of all 4 axesVery precise positioning thanks to high-resolution rotary encoder Step-by-step movement with adjustable width Continuous movement as long as it is turned Special speed mode with variable speed Start/stop of loaded jobs Save and approach zero points Switch spindle and cooling on/off Speed and spindle override during job The HR-20 handwheel information sheet can be downloaded here. The HR-20 handwheel can be used with all WinPC-NC versions from version 2.5 or higher.