NET2COM - Ethernet for WinPC-NC Professional

€139.00*

shipping weight 0.3 kg

Prices incl. VAT plus shipping costs

Available, delivery time 1-3 days (Abroad may vary)

Product number: SW10126

Product information "NET2COM - Ethernet for WinPC-NC Professional"

With the NET2COM module, the CNCCON S, CNCCON W and CNCMAX controllers with WinPC-NC Professional can be controlled directly via the network using an Ethernet cable.

Highlights:

Retrofitting of old control systems with RS232 connection to modern Ethernet connection without modification to the existing controller as a plug & play solution
Connection via Ethernet directly to the control computer or via network switch and hub
No complex configuration of the Ethernet interface necessary
No more need for USB-RS232 adapter and significantly less sensitive to interference than USB interface
1:1 connection possible with the supplied Ethernet cable and existing RS232 connection cable
Mounting on standard DIN rail
Power supply with 5V or 8-36V DC voltage possible and simple connection via screw terminals
Operation of several WinPC-NC Professional instances and controllers in the same Ethernet network possible
Comprehensive documentation in German and English. This can be found in the Documentation & Product Safety tab
Can be used starting with WinPC-NC Professional version 4.10/40

Scope of delivery:

NET2COM module
High-quality 3m Ethernet cable

Documentation

NET2COM module documentation

Product Safety

Manufacturer
Hard- und Software Burkhard Lewetz
Brückenstrasse 7
88074 Meckenbeuren
Germany

E-Mail: info@Lewetz.de
Homepage: www.Lewetz.de

Recommended accessories

WinPC-NC Version 5 printed manual

A good product also requires precise and comprehensive documentation.The printed and revised manual of WinPC-NC version 5 impresses with its precise description of the individual functions and dialogues and also offers a lot of further and useful information on WinPC-NC. The manual is bound and printed in colour.You will find the WinPC-NC manual with every WinPC-NC installation as a PDF document in the installation directory or for download from our website.

€18.00*

12V Power supply

Some of our components like the Double Axes board, the PWM-5V/10V board or the NET2COM module need an external supply voltage. For this we offer a 12V power supply with colored connectors. The cable of the plug-in power supply has a length of 1.5m. Color:red: +12V DCblack: GNDOverview:Constant voltage Output voltage 12 V Output current max. 1.5 A Power 18 W Operating voltage 230 V/AC Short-circuit proof and protected against overload Positive pole insideBuilt-in EMI filterDetails: Operating current: 1.5 A Manufacturer's color: Black Output current (max.): 1.5 A Protection class: IP44 Input voltage (max.): 264 V Input voltage (min.): 100 V Output voltage (max.): 12 V Weight: 111 g Output voltage (min.): 12 V Power (max.): 18 W Power range: 18 W (max) Operating voltage: 230 V Number of outputs: 1 x Plastic-free packaging: Plastic-free packaging Connection: Open CableHeight: 43 mm Design: Constant voltage Length (depth): 27 mm Max. temperature: 55 °C Width: 73 mm Min. temperature: -35 °C

€10.90*

25 pole screw terminal for DIN rail mounting

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. A short cable for connection to our ncNET or ncUSB module is included in the scope of delivery. A longer, pre-assembled cable can be ordered separately here. The signals can be connected at the numbered terminals.

€35.00*

25-poliges vorkonfektioniertes Sub-D-Anschlusskabel

Sub-D connector: Sub-D Male/Female

Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.

Content: 1.8 Meter (€4.79* / 1 Meter)

Variants from €6.40*

€8.63*

25 pole screw terminal for DIN rail mounting Version 1

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

€35.00*

Tip

Handwheel HR-20

The HR-20 handwheel is equipped with a replaceable 3 m cable and USB plug. With the new, more ergonomic housing, the HR-20 fits even better in the hand and can be perfectly stowed away on the CNC machine with the retaining bracket. The axes are conveniently controlled on the HR-20 via a rotary switch. The handwheel is automatically integrated by Windows and only needs to be activated in the WinPC-NC parameters under Basic Settings-interface. Start today and experience a new dimension of machine operation with WinPC-NC and the HR-20 handwheel. The HR-20 handwheel supports the following functions: Selection of all 4 axesVery precise positioning thanks to high-resolution rotary encoder Step-by-step movement with adjustable width Continuous movement as long as it is turned Special speed mode with variable speed Start/stop of loaded jobs Save and approach zero points Switch spindle and cooling on/off Speed and spindle override during job The HR-20 handwheel information sheet can be downloaded here. The HR-20 handwheel can be used with all WinPC-NC versions from version 2.5 or higher.

€269.00*

15-pin pre-assembled Sub-D connection cable

Sub-D connector: Sub-D Male/Female

Sub-D connection cable for connecting the CNC controller to the CNC electronics. The length is 1.8m. The connection cables are optionally available with Sub-D plug/plug or Sub-D plug/socket.

Content: 1.8 Meter (€4.79* / 1 Meter)

€8.63*