WinPC-NC Professional with axis controller integrated in a standard case
Product number:
SW10016
Product information "WinPC-NC Professional with axis controller integrated in a standard case"
WinPC-NC Professional with integrated external CPU axis controller meets all requirements for industrial applications and is available on the market for years. Due to the relocation of all time-critical real-time functions to the axis controller, the system runs in a stable mode, is reproducible and totally independent from any system influences or other programs which are running in the background. WinPC-NC is an international well-known system and available in more than 20 languages. In the future we will add additional languages.
For more than 20 years WinPC-NC Professional is successfully employed more than 5000 times world-wide and demonstrates each day reliability and precision in many applications. The included axis controller is available in different designs and optionally expandable by signal adapters, additional input/output modules or an external keypad for comfortable installation. Connection to the Windows PC is made via serial connection cable or by an USB serial adapter. All control tasks are executed reliably and independently.
By the digital input/output card EA160802 which can be optionally used, the existing 5 digital inputs and outputs can be expanded up to 16 inputs, 8 outputs as well as a 0-10V analog output. The inputs and outputs of the EA 160802 card are opto-decoupled for maximum reliability and can be used with 24V level. With the EA160802 card, the axis controller is completed by connector X5 and X6.
Besides the CNCCON S control unit, which is integrated in a standard cabinet, we also provide CNCCON W for the industrial use. On request additional signal levels, difference signals or A/B encoder signals are available. The CNCCON W control units can be easily integrated into the control cabinet.
Requring an all-in-one solution WinPC-NC Professional can also be delivered with the integrated complete control unit CNCMAX which provides stepper motor power stages up to 10 A phase current, switchable socket-outlet and additional potential-free main contacts as well as Emergency Stop buttons. All components are placed in a solid and well-designed steel desk-top casing and can easily be activated. Thus, all components are well-matched and this ensures trouble-free operation.
To obtain detailed information on the CNCCON W industrial version or on the CNCMAX complete control system, please send your inquiry via the contact form.
Additional information and a comprehensive overview of WinPC-NC Professional concerning specific technology functions, e. g. flame and plasma cutting, dosing, using double-heads or automatic CNC program processing without using Windows computers can be obtained here in our website where the individual products are presented.
Recommended accessories
Digital In-/Output extension card EA160802
€214.20*
The EA160802 digital input/output card is the ideal supplement for all industrial positioning and CNC controllers. In addition to 16 opto-decoupled inputs and 8 opto-decoupled outputs, it offers an additional analogue output with 0-10V. The connection of various switches and sensors, the safe switching of peripheral devices, or the control of a spindle speed with an analogue voltage value, all tasks can be solved comfortably with the help of the add-on card EA160802.The EA160802 add-on card is already included in the axis controllers in the industrial version CNCCON W and in all PC-POSI controllers. For other or older axis controllers, it can be ordered here complete with wiring and mounting material and easily retrofitted yourself. The necessary mounting material is included. When ordering the EA160802 card with a controller, we will install it before delivery. If required, several EA extension cards can be plugged together and used. This means that 16 digital inputs and 8 digital outputs are available for each EA expansion card. Overview PC/104 bus, pluggable on axis controller 16 inputs, opto-decoupled 8 outputs, opto-decoupled Voltage +/-10V to +/-30V and thus 24VDC suitable for control cabinets possible Switching times ON <25µs OFF <100µs, max 50mA Max. Current 500mA per channel of the digital outputs Two analogue outputs 0-10V, 8 bit eachMore informations and english manual available on request.
Tip
Handwheel HR-10
€249.00*
The handwheel HR-10 is perfect for operating your machine via WinPC-NC. The housing is made of robust plastic and fits very well in the hand. In addition, it has a non-slip rubber cover. The handwheel is controlled via the USB interface on the PC. For this purpose, the handwheel HR-10 has an integrated 3m long USB cable.The handwheel HR-10 supports the following functions:Selection of all 4 axes with displayVery precise positioning by rotary encoder with 100 divisionStep-by-step movement with adjustable distanceContinuous movement as long as rotation is in progressSpecial speed mode with variable speedStart/stop of loaded jobsSave and approach zero pointsSpindle and cooling on/offSpeed and spindle override with potentiometer during jobThe info sheet for the handwheel HR-10 can be downloaded here.The handwheel HR-10 can be used with all WinPC-NC variants from versions 2.5 or higher.
Tip
Handwheel HR-20
€269.00*
The HR-20 handwheel is equipped with a replaceable 3 m cable and USB plug. With the new, more ergonomic housing, the HR-20 fits even better in the hand and can be perfectly stowed away on the CNC machine with the retaining bracket. The axes are conveniently controlled on the HR-20 via a rotary switch. The handwheel is automatically integrated by Windows and only needs to be activated in the WinPC-NC parameters under Basic Settings-interface. Start today and experience a new dimension of machine operation with WinPC-NC and the HR-20 handwheel. The HR-20 handwheel supports the following functions: Selection of all 4 axesVery precise positioning thanks to high-resolution rotary encoder Step-by-step movement with adjustable width Continuous movement as long as it is turned Special speed mode with variable speed Start/stop of loaded jobs Save and approach zero points Switch spindle and cooling on/off Speed and spindle override during job The HR-20 handwheel information sheet can be downloaded here. The HR-20 handwheel can be used with all WinPC-NC versions from version 2.5 or higher.
3D-Probe and Z-Probe Bundle
€229.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.
The Z-Probe surface
and length probe can be used both as a flying probe for determining the
Z zero point and as a permanently installed probe for determining and
correcting tool lengths.
For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself,
on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
3D-Probe and Z-Probe Bundle
€229.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.
The Z-Probe surface
and length probe can be used both as a flying probe for determining the
Z zero point and as a permanently installed probe for determining and
correcting tool lengths.
For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself,
on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
3D-Probe
€149.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.For more information about the auto-levelling function in WinPC-NC with the 3D-Probe and about the probe itself, please refer to the Documentation tab.Scope of delivery:3D-ProbeHolder for 3D-ProbeSpare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
WinPC-NC Version 4 printed manual
€15.00*
A good product also requires precise and comprehensive documentation.The printed and revised manual of WinPC-NC version 4 impresses with its precise description of the individual functions and dialogues and also offers a lot of further and useful information on WinPC-NC. The manual is bound and printed in colour.You will find the WinPC-NC manual with every WinPC-NC installation as a PDF document in the installation directory or for download from our website.
25 pole screw terminal for DIN rail mounting
€35.00*
For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.
25-poliges vorkonfektioniertes Sub-D-Anschlusskabel
€6.40*
Sub-D Ausführung:
Sub-D Stecker/Stecker
Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.
Content: 1.8 Meter (€3.56* / 1 Meter)
15 pole screw terminal for DIN rail mounting
€32.00*
For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 15-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.