PWM-5V/10V board
Product number:
SW10051.1
Product information "PWM-5V/10V board"
The PWM-5V/10V board is designed to convert a 5V PWM signal into an analogue 0-5V or 0-10V signal. The conversion is linear. The analogue signal is needed, for example, to control the frequency converters of speed-controlled spindles or the power electronics of engraving lasers. Due to the many configuration options, the board is also suitable for other projects where a PWM signal has to be converted into a pure analogue signal.
The operating status of the board is symbolised by two LEDs. The board is specially designed to be plugged between the CNC control and the CNC electronics of the machine. Most signals, such as clock and direction signals, are connected through from the LPT input to the LPT output. However, the PWM signal can also be connected through one of the connectors.
The operating status of the board is symbolised by two LEDs. The board is specially designed to be plugged between the CNC control and the CNC electronics of the machine. Most signals, such as clock and direction signals, are connected through from the LPT input to the LPT output. However, the PWM signal can also be connected through one of the connectors.
The PWM-5V/10V board is offered without a housing. A DIN rail bracket is optionally available.
More information and english manual available on request.
More information and english manual available on request.
Recommended accessories
12V Power supply
€8.00*
Some of our components like the Double Axes board or the PWM-5V/10V board need an external supply voltage. For this we offer a 12V power supply with labeled connectors. The cable of the plug-in power supply has a length of 1.5m. Electrical values:
Input voltage: 100-240 VAC
Output voltage: +12VDC
Output current: 1,8A