Hardware for function extensions or special applications

Some of our components like the Double Axes board, the PWM-5V/10V board or the NET2COM module need an external supply voltage. For this we offer a 12V power supply with colored connectors. The cable of the plug-in power supply has a length of 1.5m. Color:red: +12V DCblack: GNDOverview:Constant voltage Output voltage 12 V Output current max. 1.5 A Power 18 W Operating voltage 230 V/AC Short-circuit proof and protected against overload Positive pole insideBuilt-in EMI filterDetails: Operating current: 1.5 A Manufacturer's color: Black Output current (max.): 1.5 A Protection class: IP44 Input voltage (max.): 264 V Input voltage (min.): 100 V Output voltage (max.): 12 V Weight: 111 g Output voltage (min.): 12 V Power (max.): 18 W Power range: 18 W (max) Operating voltage: 230 V Number of outputs: 1 x Plastic-free packaging: Plastic-free packaging Connection: Open CableHeight: 43 mm Design: Constant voltage Length (depth): 27 mm Max. temperature: 55 °C Width: 73 mm Min. temperature: -35 °C

The ncNET module from WinPC-NC NET can be connected either directly to the control computer or via an existing network hub or switch.If no suitable connection space is available next to the CNC machine, the network can simply be extended plug & play with this unmanaged switch. The switch is specially tested for use with WinPC-NC NET.Details:5x 10/100/1000Mbit/s auto-negotiation RJ45 portsPlug&Play, no configuration necessaryIEEE 802.3x for reliable data flow controlMetal housing for easy installationAuto MDI/MDIX detection, no cross-over cable requiredPacket forwarding rate: 7.4 MBit/sFanlessDimensions 99.8x98x25 mm Scope of delivery:5-port unmanaged network switchOperating instructionsPlug-in power supply unit to supply the network switch3m Ethernet connection cable for the connection from the control computer to the switch

With the SMC800/1500 Adaper, SMC stepper motor drivers can also be controlled with clock and direction interfaces. This makes it possible to control SMC stepper motor drivers with modern and up-to-date WinPC-NC variants such as WinPC-NC USB and WinPC-NC Professional. The SMC800/1500 adapter can easily be plugged in between the WinPC-NC hardware and the SMC stepper motor drivers. The SMC800/1500 adapter also allows you to choose between the step resolutions 200, 400 and 800 steps per revolution. In addition, the freely definable inputs and outputs can be used directly on the adapter on the corresponding screw terminals. There are 5 digital inputs for reference switches, level switches or other sensors. Likewise, 4 digital outputs can be connected to screw terminals. These can be used to control a milling spindle, output a speed signal or for many other applications.The price shown here is a special price that is only valid when used with a WinPC-NC licence.

The EA160802 digital input/output card is the ideal supplement for all industrial positioning and CNC controllers. In addition to 16 opto-decoupled inputs and 8 opto-decoupled outputs, it offers an additional analogue output with 0-10V. The connection of various switches and sensors, the safe switching of peripheral devices, or the control of a spindle speed with an analogue voltage value, all tasks can be solved comfortably with the help of the add-on card EA160802.The EA160802 add-on card is already included in the axis controllers in the industrial version CNCCON W and in all PC-POSI controllers. For other or older axis controllers, it can be ordered here complete with wiring and mounting material and easily retrofitted yourself. The necessary mounting material is included. When ordering the EA160802 card with a controller, we will install it before delivery. If required, several EA extension cards can be plugged together and used. This means that 16 digital inputs and 8 digital outputs are available for each EA expansion card. Overview    PC/104 bus, pluggable on axis controller    16 inputs, opto-decoupled    8 outputs, opto-decoupled    Voltage +/-10V to +/-30V and thus 24VDC suitable for control cabinets possible    Switching times ON <25µs OFF <100µs, max 50mA    Max. Current 500mA per channel of the digital outputs    Two analogue outputs 0-10V, 8 bit eachMore informations and english manual available on request.

We only offer this product as a spare part. For new projects and developments we recommend our alternative products. For orders as spare parts, please send us an e-mail to info@Lewetz.de The double axes board was developed to synchronously control two drive units for one axis direction. With two drives for one axis direction, special care must be taken during the reference run and the necessary alignment of the gantry. The double axes board evaluates a separate reference switch for each drive and aligns the gantry exactly again after the reference run.The board has been specially designed to be plugged in between the CNC control and the CNC electronics of the machine. The signals that are not required are connected through between the LPT input and the LPT output. Due to the many configuration options and the detailed description, the corresponding inputs and outputs on the board can be assigned to the corresponding free input and output pins as desired. This eliminates the need to change the existing assignment and the CNC machine can be easily retrofitted with the double axes board.Extensive documentation on the application possibilities can be found here.

With the NET2COM module, the CNCCON S, CNCCON W and CNCMAX controllers with WinPC-NC Professional can be controlled directly via the network using an Ethernet cable. Highlights: Retrofitting of old control systems with RS232 connection to modern Ethernet connection without modification to the existing controller as a plug & play solution Connection via Ethernet directly to the control computer or via network switch and hub No complex configuration of the Ethernet interface necessary No more need for USB-RS232 adapter and significantly less sensitive to interference than USB interface 1:1 connection possible with the supplied Ethernet cable and existing RS232 connection cable Mounting on standard DIN rail Power supply with 5V or 8-36V DC voltage possible and simple connection via screw terminals Operation of several WinPC-NC Professional instances and controllers in the same Ethernet network possibleComprehensive documentation in German and English. This can be found in the Documentation & Product Safety tab Can be used starting with WinPC-NC Professional version 4.10/40 Scope of delivery:NET2COM module High-quality 3m Ethernet cable

The ncNET module requires an external supply voltage. This power supply unit is ideal for the ncNET module and is simply connected to the hollow socket of the ncNET module with reverse polarity protection. The cable of the plug-in power supply has a length of 1.5m. Overview:Constant voltage Output voltage 12 V Output current max. 1.5 A Power 18 W Operating voltage 230 V/AC Short-circuit proof and protected against overload Positive pole insideBuilt-in EMI filterDetails: Operating current: 1.5 A Manufacturer's color: Black Output current (max.): 1.5 A Protection class: IP44 Input voltage (max.): 264 V Input voltage (min.): 100 V Output voltage (max.): 12 V Weight: 111 g Output voltage (min.): 12 V Power (max.): 18 W Power range: 18 W (max) Operating voltage: 230 V Number of outputs: 1 x Plastic-free packaging: Plastic-free packaging Connection: SocketHeight: 43 mm Design: Constant voltage Length (depth): 27 mm Max. temperature: 55 °C Width: 73 mm Min. temperature: -35 °C

The WinPC-NC NET/USB Breakoutboard is the perfect addition for using the input and output signals from WinPC-NC NET or WinPC-NC USB with ncNET or ncUSB modules as switching signals and wiring them directly. The ncNET or ncUSB module is permanently installed on the board using the mounting connectors supplied. The Breakoutboard is therefore also perfect for retrofitting if an ncNET or ncUSB module is already available.Overview:Can be used with ncNET or ncUSB module Outputs Clock/direction, enable or current reduction and alarm signal for 4 axes 12 outputs with 5V-36V DC, open collector outputs for maximum flexibility  8 freely usable inputs, supply voltage 5V-24V DC for NPN or mechanical switches  1 input with direct connection for our 3D probe or Z-probe1 emergency stop input  2 outputs with relay output maximum 50V/ 1A 1 spindle output for enabling the frequency inverter5V PWM output and 0-10V analog output for controlling the spindle speed or laser power All digital inputs, outputs, and signals for the axes are galvanically isolated by optocouplers Status LED for all errors and important states, LED display for current status of inputs and outputsCan be installed on DIN Rail or backplaneScope of delivery: ** The ncUSB and ncNET hardware shown is not included in the scope of delivery. WinPC-NC NET/USB Breakoutboard 1 set of connectors for ncUSB module 1 set of connectors for ncNET module Comprehensive instructions for the WinPC-NC NET/USB Breakoutboard can be found here.