WinPC-NC Update from version 4 to latest version 4.x
Product information "WinPC-NC Update from version 4 to latest version 4.x"
For already registered customers, the update within the main version of WinPC-NC is always possible free of charge via download. In addition, we also offer the current programme version with shipping on CD. If you have already installed a version 4 of WinPC-NC, you can load the current version with the information below.
The update must be downloaded and installed manually. Detailed instructions with pictures can be downloaded here. The update can be downloaded directly from the download area of our homepage.
Attention: The update does not replace a complete installation of WinPC-NC and is only possible if version 4 of WinPC-NC is already installed on the computer.
Our recommendations
WinPC-NC Version 4 printed manual
€15.00*
A good product also requires precise and comprehensive documentation.The printed and revised manual of WinPC-NC version 4 impresses with its precise description of the individual functions and dialogues and also offers a lot of further and useful information on WinPC-NC. The manual is bound and printed in colour.You will find the WinPC-NC manual with every WinPC-NC installation as a PDF document in the installation directory or for download from our website.
Tip
Handwheel HR-20
€269.00*
The HR-20 handwheel is equipped with a replaceable 3 m cable and USB plug. With the new, more ergonomic housing, the HR-20 fits even better in the hand and can be perfectly stowed away on the CNC machine with the retaining bracket. The axes are conveniently controlled on the HR-20 via a rotary switch. The handwheel is automatically integrated by Windows and only needs to be activated in the WinPC-NC parameters under Basic Settings-interface. Start today and experience a new dimension of machine operation with WinPC-NC and the HR-20 handwheel. The HR-20 handwheel supports the following functions: Selection of all 4 axesVery precise positioning thanks to high-resolution rotary encoder Step-by-step movement with adjustable width Continuous movement as long as it is turned Special speed mode with variable speed Start/stop of loaded jobs Save and approach zero points Switch spindle and cooling on/off Speed and spindle override during job The HR-20 handwheel information sheet can be downloaded here. The HR-20 handwheel can be used with all WinPC-NC versions from version 2.5 or higher.
Tip
Handwheel HR-10
€249.00*
The handwheel HR-10 is perfect for operating your machine via WinPC-NC. The housing is made of robust plastic and fits very well in the hand. In addition, it has a non-slip rubber cover. The handwheel is controlled via the USB interface on the PC. For this purpose, the handwheel HR-10 has an integrated 3m long USB cable.The handwheel HR-10 supports the following functions:Selection of all 4 axes with displayVery precise positioning by rotary encoder with 100 divisionStep-by-step movement with adjustable distanceContinuous movement as long as rotation is in progressSpecial speed mode with variable speedStart/stop of loaded jobsSave and approach zero pointsSpindle and cooling on/offSpeed and spindle override with potentiometer during jobThe info sheet for the handwheel HR-10 can be downloaded here.The handwheel HR-10 can be used with all WinPC-NC variants from versions 2.5 or higher.
3D-Probe and Z-Probe Bundle
€229.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.
The Z-Probe surface
and length probe can be used both as a flying probe for determining the
Z zero point and as a permanently installed probe for determining and
correcting tool lengths.
For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself,
on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
3D-Probe and Z-Probe Bundle
€229.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.
The Z-Probe surface
and length probe can be used both as a flying probe for determining the
Z zero point and as a permanently installed probe for determining and
correcting tool lengths.
For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself,
on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware