Low Cost 3A Schrittmotor

15-pin pre-assembled Sub-D connection cable

Sub-D connection cable for connecting the CNC controller to the CNC electronics. The length is 1.8m. The connection cables are optionally available with Sub-D plug/plug or Sub-D plug/socket.

Content: 1.8 Meter (€3.56* / 1 Meter)

Variants from €8.63*

€6.40*

Details

15 pole screw terminal LC version

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter, the input and output signals can be wired easily and professionally. The connection adapter can be screwed directly to the control and the signals can be tapped at the numbered terminals.The connection adapters are available either as SubD male and female connector.

€14.00*

Details

USB 2.0 cable 3m for ncUSB / SC100B

USB 2.0 Hi-Speed cable, transparent 3m. USB 2.0 plug (type A) to USB 2.0 plug (type B). Compatible with ncUSB module, SC100B and Hammer USB module.

Content: 3 Meter (€1.00* / 1 Meter)

€2.99*

CAT6A patch cable 3m for ncNET and NET2COM

Copper conductor (CU), halogen-free cable sheath (LSZH), 3m blue. Our CAT cables transmit signals in maximum quality at extreme speed and ensure a stable connection. Our connection cables and plugs are characterized by high-quality inner conductors, robust cable sheathing and precisely fitting plugs. Compatible with WinPC-NC USB with nc100 or SC100C adapter. Double-shielded LAN cable with 2x RJ45 connections for connecting network components CAT 6A network cable suitable for 10 Gigabit Ethernet 10BASE-T, 100BASE-TX, 1000BASE-T, 10/100/1000/10000 Mbit/s S/FTP overall shielding: aluminum foil shielding for individual wire pairs (PiMF) and aluminum braided shielding for the cable jacket High-quality copper conductor (CU) and 3µ gold-plated contact surfaces guarantee an excellent, high-performance network connection. Anti-kink sleeve and robust sheathing provide optimum protection for the Ethernet cable against cable breakage. Latching lug protection on the RJ45 plug prevents the latching lug from snagging or breaking off to ensure a reliable Internet connection. Internet cable is CAT 6A-tested (incl. measurement protocol) and suitable for Power over Ethernet (PoE, PoE+).

Content: 3 Meter (€1.43* / 1 Meter)

€4.29*

ncUSB Mounting Adapter

The mounting adapter for the ncUSB module allows the module to be attached to a din rail / mounting rail or mounting plate. The adapter is robust and stable. Thanks to the precise design, the module is locked in the adapter and cannot be moved. The mounting brackets used for the mounting rail hold firmly on the mounting rail so that installation is possible without end brackets. The mounting brackets can also be removed and the module can be attached to a mounting plate using the adapter and 4 holes. You can find the right adapter for the ncNET module here.

€31.00*

25 pole screw terminal for DIN rail mounting

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. A short cable for connection to our ncNET or ncUSB module is included in the scope of delivery. A longer, pre-assembled cable can be ordered separately here. The signals can be connected at the numbered terminals.

€35.00*

15 pole screw terminal for DIN rail mounting

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 15-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be connected at the numbered terminals.

€32.00*

25-poliges vorkonfektioniertes Sub-D-Anschlusskabel

Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.

Content: 1.8 Meter (€3.56* / 1 Meter)

€6.40*

Details

15 pole screw terminal for DIN rail mounting Version 1

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 15-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

€32.00*

ncNET Mounting Adapter

The mounting adapter for the ncNET module allows the module to be attached to a din rail / mounting rail or mounting plate. The adapter is robust and stable. Thanks to the precise design, the module is locked in the adapter and cannot be moved. The mounting brackets used for the mounting rail hold firmly on the mounting rail so that installation is possible without end brackets. The mounting brackets can also be removed and the module can be attached to a mounting plate using the adapter and 4 holes. You can find the right adapter for the ncUSB module here.

€33.00*

25 pole screw terminal LC version

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter, the input and output signals can be wired easily and professionally. The connection adapter can be screwed directly to the control and the signals can be tapped at the numbered terminals.The connection adapters are available either as SubD male and female connector.

€16.00*

Details

25 pole screw terminal for DIN rail mounting Version 1

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

€35.00*

Z-Probe / 3D-Probe connection cable

Connection cable for our 3D-Probe and Z-Probe with magnetic contacts and open wire end sleeves.For connecting to our hardware or components from other manufacturers, 2 m long.Wire colors:Brown: Power supply +Blue: GNDBlack: Probe SignalMore information can be found at the article 3D-Probe and Z-Probe Bundle.

Content: 2 Meter (€6.20* / 1 Meter)

€12.40*

Z-Probe / 3D-Probe connection cable

Y-adapter cable with screw terminal. This adapter cable is always required when signals such as the PWM or toggle signal need to be accessed between CNC hardware such as the ncUSB or ncNET module or the CNCCON axis controller. All signals are forwarded 1:1 between all three connections.

Content: 0.3 Meter (€83.00* / 1 Meter)

€24.90*

USB 2.0 cable 3m for nc100 / SC100C

USB 2.0 Hi-Speed cable, black 3m. USB 2.0 plug (type A) to USB 2.0 micro plug (type B). Compatible with WinPC-NC USB with nc100 or SC100C adapter.

Content: 3 Meter (€0.73* / 1 Meter)

€2.19*

Stepper motor connection cable for StepMAX or CNCMAX

Motor cables need to meet certain requirements to ensure safe and correct operation. Therefore, we recommend our motor cables for connecting your stepper motors to a StepMAX or CNCMAX controller. As the motor cable is delivered in one piece and as a running meter and is not pre-assembled, these motor cables can also be used for other controllers or applications. For longer motor cables, please order the appropriate number. We supply a SubD connector and the appropriate housing for soldering the motor cables with each meter of motor cable. This means that the motor cables can be firmly screwed to the control unit and connected to the connection cables of the stepper motor at the other end.

€5.00*

StepMAX 3/30 - motor driver for 3 axes

We only offer this product as a spare part. For new projects and developments we recommend our alternative products. For orders as spare parts, please send us an e-mail to info@Lewetz.de Our Step3S stepper motor driver card is also available with a matching power supply and in a practical desktop housing. This is the ideal control solution for do-it-yourself machine builders who want control software and matching electronics from a single manufacturer.Technical data StepMAXSimple 230VAC connectionall connections pluggable on one sideadjustable for 3 or 4 stepper motors with phase current 1-3AAxis resolutions freely adjustable for each axisLPT-compatible control with 1:1 cableWell-dimensioned power supply to run 3D tracks without problems1 relay output on Schuko socket 230VAC1 relay output potential-free on 2 terminals5 inputs on SubD plugEmergency stop contact for external connectionAnalogue output 0-10V for spindle speed controlSupplied with power supply cable, LPT cable and connection descriptionUsable and fully compatible with all our control programmes or with third-party productsStepMAX3/30 - for 3 axes up to 3A phase currentStepMAX4/30 - for 4 axes up to 3A phase currentThe StepMAX3/30 can also be extended by a 4th axis at a later date by installing a Step1S extension card.

€599.00*

Details

Step3S stepper motor driver for 3 or 4 Axes

We only offer this product as a spare part. For new projects and developments we recommend our alternative products. For orders as spare parts, please send us an e-mail to info@Lewetz.deFor the direct control of stepper motors, we offer our proven Step3S board, which has been further developed many times. With the Step3S card, 3 stepper motors can be directly controlled with up to 3A phase current. To extend the function, the Step1S card is available for a fourth axis and the Step3S-IO card for additional inputs and outputs. The Step3S card has been specially designed for use with WinPC-NC, but is also compatible with any other clock and direction interface from other manufacturers.The Step3S is available both individually and in a robust desktop housing.Highlights of the Step3S board:Up to 3 axes controllable, with Step1S expansion card up to 4 axesPhase current adjustable from 1A to 3A in 0.25A steps for each axisStep resolution adjustable in full, half, quarter, eighth and 1/16 steps or 1/2.5 to 1/10 step with sinusoidal microstep for each axisStepper motors can be connected unipolar and bipolarAC or DC operation without external stabilisation, e.g. with toroidal transformer (12-30VAC or 15-42VDC)Current reduction at standstill controllable via software inputReady switch or EMERGENCY STOP goes directly to Enable of the output stages, e.g. for connection of a safety housingConnection terminal for 5 limit and/or reference switches or other signals3 relay outputs (230V-capable) e.g. for drilling spindle and coolant pump, collet chuck/moletteOperating status indication by LEDs and possibility of integrating them in the front of the housingSafety circuit with evaluation of toggle signal to avoid undefined statesPWM signal evaluation and output 0-10V or 0-5V for spindle controlCombined plug-in/screw terminals for easy installation and maintenanceNormal version up to 50°C ambient temperature and special HT version up to 70°CMotor phase short-circuit and temperature monitoringDetailed operating instructions with all necessary technical detailsAdjustable ramp-up timeDimensions 130 x 150 x 52 mmThe Step3S board is available in two versions:Step3S for ambient temperature up to 50°CStep3S HT for ambient temperature up to 70°CA 25-pin cable for direct connection to the controller is included in the delivery.

€259.00*

Details

Stepper motor 3A class, Type 4

Documentation

Product Safety