Stepper motor 3A class, Type 6

Motorkabel benötigen bestimmte Anforderungen um einen sicheren und sauberen Betrieb zu gewährleisten. Zum Anschluss Ihrer Schrittmotoren an eine StepMAX oder CNCMAX Steuerung empfehlen wir daher unsere Motorkabel. Da das Motorkabel am Stück und als laufender Meter geliefert wird und nicht vorkonfektioniert ist, können diese Motorkabeln auch für andere Steuerungen oder Anwendungen verwendet werden.Für längere Motorkabel bestellen Sie bitte die entsprechende Anzahl. Je Meter Motorkabel liefern wir einen SubD-Stecker und das passende Gehäuse zum Löten der Motorkabel mit.  Somit können die Motorkabel an der Steuerung fest verschraubt werden und an der anderen Seite mit den Anschlusskabeln des Schrittmotors verbunden werden.

Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 15-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter, the input and output signals can be wired easily and professionally. The connection adapter can be screwed directly to the control and the signals can be tapped at the numbered terminals.The connection adapters are available either as SubD male and female connector.

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter, the input and output signals can be wired easily and professionally. The connection adapter can be screwed directly to the control and the signals can be tapped at the numbered terminals.The connection adapters are available either as SubD male and female connector.

For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

Our Step3S stepper motor driver card is also available with a matching power supply and in a practical desktop housing. This is the ideal control solution for do-it-yourself machine builders who want control software and matching electronics from a single manufacturer.Technical data StepMAXSimple 230VAC connectionall connections pluggable on one sideadjustable for 3 or 4 stepper motors with phase current 1-3AAxis resolutions freely adjustable for each axisLPT-compatible control with 1:1 cableWell-dimensioned power supply to run 3D tracks without problems1 relay output on Schuko socket 230VAC1 relay output potential-free on 2 terminals5 inputs on SubD plugEmergency stop contact for external connectionAnalogue output 0-10V for spindle speed controlSupplied with power supply cable, LPT cable and connection descriptionUsable and fully compatible with all our control programmes or with third-party productsStepMAX3/30 - for 3 axes up to 3A phase currentStepMAX4/30 - for 4 axes up to 3A phase currentThe StepMAX3/30 can also be extended by a 4th axis at a later date by installing a Step1S extension card.

For the direct control of stepper motors, we offer our proven Step3S board, which has been further developed many times. With the Step3S card, 3 stepper motors can be directly controlled with up to 3A phase current. To extend the function, the Step1S card is available for a fourth axis and the Step3S-IO card for additional inputs and outputs. The Step3S card has been specially designed for use with WinPC-NC, but is also compatible with any other clock and direction interface from other manufacturers.The Step3S is available both individually and in a robust desktop housing.Highlights of the Step3S board:Up to 3 axes controllable, with Step1S expansion card up to 4 axesPhase current adjustable from 1A to 3A in 0.25A steps for each axisStep resolution adjustable in full, half, quarter, eighth and 1/16 steps or 1/2.5 to 1/10 step with sinusoidal microstep for each axisStepper motors can be connected unipolar and bipolarAC or DC operation without external stabilisation, e.g. with toroidal transformer (12-30VAC or 15-42VDC)Current reduction at standstill controllable via software inputReady switch or EMERGENCY STOP goes directly to Enable of the output stages, e.g. for connection of a safety housingConnection terminal for 5 limit and/or reference switches or other signals3 relay outputs (230V-capable) e.g. for drilling spindle and coolant pump, collet chuck/moletteOperating status indication by LEDs and possibility of integrating them in the front of the housingSafety circuit with evaluation of toggle signal to avoid undefined statesPWM signal evaluation and output 0-10V or 0-5V for spindle controlCombined plug-in/screw terminals for easy installation and maintenanceNormal version up to 50°C ambient temperature and special HT version up to 70°CMotor phase short-circuit and temperature monitoringDetailed operating instructions with all necessary technical detailsAdjustable ramp-up timeDimensions 130 x 150 x 52 mmThe Step3S board is available in two versions:Step3S for ambient temperature up to 50°CStep3S HT for ambient temperature up to 70°CA 25-pin cable for direct connection to the controller is included in the delivery.