Surface and length sensor Z-Probe
Product number:
SW10098
Product information "Surface and length sensor Z-Probe"
The Z-Probe surface and length probe can be used both as a flying probe for determining the Z zero point and as a permanently installed probe for determining and correcting tool lengths.
For more information on Z zero point determination, the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.
Scope of delivery:
- Z-Probe
- Connection cable 2m with magnetic connector
-
25 pole screw terminal for easy connection to control hardware
Recommended accessories
Tip
Handwheel HR-10
€249.00*
The handwheel HR-10 is perfect for operating your machine via WinPC-NC. The housing is made of robust plastic and fits very well in the hand. In addition, it has a non-slip rubber cover. The handwheel is controlled via the USB interface on the PC. For this purpose, the handwheel HR-10 has an integrated 3m long USB cable.The handwheel HR-10 supports the following functions:Selection of all 4 axes with displayVery precise positioning by rotary encoder with 100 divisionStep-by-step movement with adjustable distanceContinuous movement as long as rotation is in progressSpecial speed mode with variable speedStart/stop of loaded jobsSave and approach zero pointsSpindle and cooling on/offSpeed and spindle override with potentiometer during jobThe info sheet for the handwheel HR-10 can be downloaded here.The handwheel HR-10 can be used with all WinPC-NC variants from versions 2.5 or higher.
Tip
Handwheel HR-20
€269.00*
The HR-20 handwheel is equipped with a replaceable 3 m cable and USB plug. With the new, more ergonomic housing, the HR-20 fits even better in the hand and can be perfectly stowed away on the CNC machine with the retaining bracket. The axes are conveniently controlled on the HR-20 via a rotary switch. The handwheel is automatically integrated by Windows and only needs to be activated in the WinPC-NC parameters under Basic Settings-interface. Start today and experience a new dimension of machine operation with WinPC-NC and the HR-20 handwheel. The HR-20 handwheel supports the following functions: Selection of all 4 axesVery precise positioning thanks to high-resolution rotary encoder Step-by-step movement with adjustable width Continuous movement as long as it is turned Special speed mode with variable speed Start/stop of loaded jobs Save and approach zero points Switch spindle and cooling on/off Speed and spindle override during job The HR-20 handwheel information sheet can be downloaded here. The HR-20 handwheel can be used with all WinPC-NC versions from version 2.5 or higher.
3D-Probe and Z-Probe Bundle
€229.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.
The Z-Probe surface
and length probe can be used both as a flying probe for determining the
Z zero point and as a permanently installed probe for determining and
correcting tool lengths.
For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself,
on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
3D-Probe and Z-Probe Bundle
€229.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.
The Z-Probe surface
and length probe can be used both as a flying probe for determining the
Z zero point and as a permanently installed probe for determining and
correcting tool lengths.
For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself,
on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
3D-Probe
€149.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.For more information about the auto-levelling function in WinPC-NC with the 3D-Probe and about the probe itself, please refer to the Documentation tab.Scope of delivery:3D-ProbeHolder for 3D-ProbeSpare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
12V Power supply
€8.00*
Some of our components like the Double Axes board or the PWM-5V/10V board need an external supply voltage. For this we offer a 12V power supply with labeled connectors. The cable of the plug-in power supply has a length of 1.5m. Electrical values:
Input voltage: 100-240 VAC
Output voltage: +12VDC
Output current: 1,8A
WinPC-NC Version 4 printed manual
€15.00*
A good product also requires precise and comprehensive documentation.The printed and revised manual of WinPC-NC version 4 impresses with its precise description of the individual functions and dialogues and also offers a lot of further and useful information on WinPC-NC. The manual is bound and printed in colour.You will find the WinPC-NC manual with every WinPC-NC installation as a PDF document in the installation directory or for download from our website.