WinPC-NC NET with ncNET

€299.00*

shipping weight 0.3 kg

Available, delivery time 1-3 days (Abroad may vary)

Product number: SW10110
Product information "WinPC-NC NET with ncNET"
The WinPC-NC NET variant is the latest WinPC-NC variant and has a range of functions comparable to WinPC-NC USB. In addition, WinPC-NC NET contains special technology functions for flame and plasma cutting. In contrast to earlier WinPC-NC variants, the ncNET module supplied is connected either directly to the control computer or via an existing network using a standard Ethernet cable. The robust and interference-resistant connection is particularly suitable for sensitive applications such as flame and plasma cutting or harsh industrial environments. 

The highlights of WinPC-NC NET at a glance: 
  • Network connection for maximum stability. Connection directly to control computer or via network switch and hub 
  • Compatible with all previous WinPC-NC variants and all components that were previously controlled with WinPC-NC. Assignment is 1:1 compatible with all previous variants such as WinPC-NC Light, Economy, USB, Professional and PC-NC
  • Technology functions for flame and plasma cutting integrated in WinPC-NC NET 
  • Internal clock frequency 168 MHz for best performance and output of motor clock signals up to 8 x faster than previous WinPC-NC variants 
  • Control of up to 4 axes with clock and direction signals with 5V TTL logic 
  • Inputs and outputs decoupled and amplified for maximum interference resistance 
  • 10 inputs with low-pass filter, Schmitt trigger evaluation and overvoltage-proof up to 38V DC 
  • 16 digital outputs with 5V TTL logic, loadable up to a maximum of +- 25mA and +-50mA per output group of 4 
  • External power supply with 5V DC or 12V-36V DC for maximum flexibility and control cabinet voltage.
    (External power supply not included in the scope of delivery)   
WinPC-NC can be used on modern computers or notebooks and netbooks with both 32- and 64-bit Windows operating systems without any problems.  

The motor control takes place in the ncNET module and is therefore largely independent of Windows and its background processes and programs. With WinPC-NC NET you are ideally equipped for the future and independent of LPT interfaces in the PC or the connection via USB.  

WinPC-NC NET offers no restrictions in terms of computer equipment and can be used on all current Windows operating system versions. In addition, WinPC-NC NET is constantly being further developed.  

WinPC-NC has been used tens of thousands of times worldwide since 2000 and is constantly being developed and improved, whereby the wishes and suggestions of our users also play a major role for us. The international distribution of WinPC-NC is guaranteed by the more than 20 languages currently available and further languages are in preparation.  

Scope of delivery:  
  • WinPC-NC NET single license, valid with the supplied hardware  
  • ncNET module  
  • High-quality 3m Ethernet cable  

The ncNET module requires a separate power supply. This is not included in the scope of delivery. A suitable power supply unit can be ordered as an option. The external power supply requires a stabilized output voltage of 5V DC with 1A or 12-36V DC with 1.5A. Further information on connecting the power supply can be found here.  

We offer an optional adapterfor mounting the ncNET module on a top-hat rail or mounting plate. You can find it here.

In addition to WinPC-NC NET, we also offer WinPC-NC Professional software for semi-professional and industrial use. With WinPC-NC Professional, demanding applications such as dispensing and many more can be perfectly executed with the already integrated technology functions. With the CNCCON axis controller or the CNCMAX complete controller, differential signals or A/B encoder signals can optionally be output for controlling the axes or 24V-compatible control cabinet signals and a 0-10V analog output can be used.  

Further information on WinPC-NC can be found here under the products on our website.

Recommended accessories

Power supply for ncNET
The ncNET module requires an external supply voltage. This power supply unit is ideal for the ncNET module and is simply connected to the hollow socket of the ncNET module with reverse polarity protection. The cable of the plug-in power supply has a length of 1.5m. Electrical values: Input voltage: 100-240 VAC Output voltage: +12VDC Output current: 1,5A

€6.80*
5-port unmanaged Switch - for ncNET
The ncNET module from WinPC-NC NET can be connected either directly to the control computer or via an existing network hub or switch.If no suitable connection space is available next to the CNC machine, the network can simply be extended plug & play with this unmanaged switch. The switch is specially tested for use with WinPC-NC NET.Details:5x 10/100/1000Mbit/s auto-negotiation RJ45 portsPlug&Play, no configuration necessaryIEEE 802.3x for reliable data flow controlMetal housing for easy installationAuto MDI/MDIX detection, no cross-over cable requiredPacket forwarding rate: 7.4 MBit/sFanlessDimensions 99.8x98x25 mm Scope of delivery:5-port unmanaged network switchOperating instructionsPlug-in power supply unit to supply the network switch3m Ethernet connection cable for the connection from the control computer to the switch

€33.00*
Tip
Handwheel HR-20
The HR-20 handwheel is equipped with a replaceable 3 m cable and USB plug. With the new, more ergonomic housing, the HR-20 fits even better in the hand and can be perfectly stowed away on the CNC machine with the retaining bracket. The axes are conveniently controlled on the HR-20 via a rotary switch. The handwheel is automatically integrated by Windows and only needs to be activated in the WinPC-NC parameters under Basic Settings-interface. Start today and experience a new dimension of machine operation with WinPC-NC and the HR-20 handwheel. The HR-20 handwheel supports the following functions: Selection of all 4 axesVery precise positioning thanks to high-resolution rotary encoder Step-by-step movement with adjustable width Continuous movement as long as it is turned Special speed mode with variable speed Start/stop of loaded jobs Save and approach zero points Switch spindle and cooling on/off Speed and spindle override during job The HR-20 handwheel information sheet can be downloaded here. The HR-20 handwheel can be used with all WinPC-NC versions from version 2.5 or higher.

€269.00*
3D-Probe and Z-Probe Bundle
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws. The Z-Probe surface and length probe can be used both as a flying probe for determining the Z zero point and as a permanently installed probe for determining and correcting tool lengths. For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself, on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and  Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector 25 pole screw terminal for easy connection to control hardware

€229.00*
ncNET Mounting Adapter
The mounting adapter for the ncNET module allows the module to be attached to a din rail / mounting rail or mounting plate. The adapter is robust and stable. Thanks to the precise design, the module is locked in the adapter and cannot be moved. The mounting brackets used for the mounting rail hold firmly on the mounting rail so that installation is possible without end brackets. The mounting brackets can also be removed and the module can be attached to a mounting plate using the adapter and 4 holes. You can find the right adapter for the ncUSB module here.

€33.00*
25-poliges vorkonfektioniertes Sub-D-Anschlusskabel
Sub-D Ausführung: Sub-D Stecker/Stecker
Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.

Content: 1.8 Meter (€3.56* / 1 Meter)

€6.40*
25 pole screw terminal for DIN rail mounting
For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.

€35.00*
PWM-5V/10V board
Select mounting: With Din-rail retainer
The PWM-5V/10V board is designed to convert a 5V PWM signal into an analogue 0-5V or 0-10V signal. The conversion is linear. The analogue signal is needed, for example, to control the frequency converters of speed-controlled spindles or the power electronics of engraving lasers. Due to the many configuration options, the board is also suitable for other projects where a PWM signal has to be converted into a pure analogue signal.The operating status of the board is symbolised by two LEDs. The board is specially designed to be plugged between the CNC control and the CNC electronics of the machine. Most signals, such as clock and direction signals, are connected through from the LPT input to the LPT output. However, the PWM signal can also be connected through one of the connectors.The PWM-5V/10V board is offered without a housing. A DIN rail bracket is optionally available. More information and english manual available on request.

Variants from €55.00*
€59.00*
WinPC-NC Version 4 printed manual
A good product also requires precise and comprehensive documentation.The printed and revised manual of WinPC-NC version 4 impresses with its precise description of the individual functions and dialogues and also offers a lot of further and useful information on WinPC-NC. The manual is bound and printed in colour.You will find the WinPC-NC manual with every WinPC-NC installation as a PDF document in the installation directory or for download from our website.

€15.00*