StepMAX 4/30 - motor driver for 4 axes
Product number:
SW10057
Product information "StepMAX 4/30 - motor driver for 4 axes "
Our Step3S stepper motor driver card is also available with a matching power supply and in a practical desktop housing. This is the ideal control solution for do-it-yourself machine builders who want control software and matching electronics from a single manufacturer.
Technical data StepMAX
StepMAX3/30 - for 3 axes up to 3A phase current
StepMAX4/30 - for 4 axes up to 3A phase current
The StepMAX3/30 can also be extended by a 4th axis at a later date by installing a Step1S extension card.
Technical data StepMAX
- Simple 230VAC connection
- all connections pluggable on one side
- adjustable for 3 or 4 stepper motors with phase current 1-3A
- Axis resolutions freely adjustable for each axis
- LPT-compatible control with 1:1 cable
- Well-dimensioned power supply to run 3D tracks without problems
- 1 relay output on Schuko socket 230VAC
- 1 relay output potential-free on 2 terminals
- 5 inputs on SubD plug
- Emergency stop contact for external connection
- Analogue output 0-10V for spindle speed control
- Supplied with power supply cable, LPT cable and connection description
- Usable and fully compatible with all our control programmes or with third-party products
StepMAX3/30 - for 3 axes up to 3A phase current
StepMAX4/30 - for 4 axes up to 3A phase current
The StepMAX3/30 can also be extended by a 4th axis at a later date by installing a Step1S extension card.
Our Recommendation
15 pole screw terminal for DIN rail mounting
€32.00*
For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 15-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.
Schrittmotoranschlusskabel für StepMAX oder CNCMAX
€5.00*
Motorkabel benötigen bestimmte Anforderungen um einen sicheren und sauberen Betrieb zu gewährleisten. Zum Anschluss Ihrer Schrittmotoren an eine StepMAX oder CNCMAX Steuerung empfehlen wir daher unsere Motorkabel. Da das Motorkabel am Stück und als laufender Meter geliefert wird und nicht vorkonfektioniert ist, können diese Motorkabeln auch für andere Steuerungen oder Anwendungen verwendet werden.Für längere Motorkabel bestellen Sie bitte die entsprechende Anzahl. Je Meter Motorkabel liefern wir einen SubD-Stecker und das passende Gehäuse zum Löten der Motorkabel mit. Somit können die Motorkabel an der Steuerung fest verschraubt werden und an der anderen Seite mit den Anschlusskabeln des Schrittmotors verbunden werden.
Stepper motor 3A class, Type 4
€35.70*
Low-cost stepper motor 2.5A with good running characteristics for use with our Step3S stepper motor card or other stepper motor drivers.Technical data:Minebea type 23LM-C355-294 connections, bipolar1.8 degrees, 200 steps/revHolding torque 0.92NmPhase current 2.5A (bipolar)Rotor inertia 110gcm2Weight 570gDimensions 57 x 57 x 51mmAttention : Motor has two mechanical features 1. shaft is approx. 5mm corrugated 2. no usual 5mm holes at the flange, but M3 internal thread
Stepper motor 3A class, Type 6
€58.31*
Powerful 3A stepper motor with terminal box. For use with our Step3S stepper motor card or other stepper motor drivers.Technical data:can be used with Step3S, CNCMAX30 and CNCPOS30Type BLM236bipolar parallel1.8 degrees, 200 steps/revolutionHolding torque 1.2Nm3A phase currentWeight 1.1kgDimensions 56 x 56 x 105mm (with terminal box)