WinPC-NC NET with ncNET Upgrade from other WinPC-NC variants
Product number:
SW10114.4
Product information "WinPC-NC NET with ncNET Upgrade from other WinPC-NC variants"
Attention: Depending on which WinPC-NC variant you are currently using, the price for the upgrade differs. Please select the WinPC-NC version you are currently using above the "Add to shopping cart" button.
When upgrading a WinPC-NC version to a higher-value version, we always charge a large part of the old purchase price. Of course, this only applies if you return the delivered hardware to us.
After your purchase, we will contact you by e-mail with further information on how to return the hardware.
This item includes the upgrade to WinPC-NC NET with ncNET module and Ethernet connection cable. A detailed description of WinPC-NC NET with ncNET module can be found in the WinPC-NC NET article: https://lewetz.net/en/WinPC-NC-NET-with-ncNET/SW10110
Please note the following scope of delivery depending on the currently used variant:
WinPC-NC USB with ncUSB module:
You send us back: The ncUSB module.
We deliver to you: A WinPC-NC NET license, the ncNET module and an Ethernet connection cable.
WinPC-NC USB full version for Stepcraft machines / WinPC-NC Starter:
You send us back: the SC100B (D-/Q-series) or SC100C (M-series) card.
We deliver to you: A WinPC-NC NET license, the ncNET module and an Ethernet connection cable. You will also receive a LPT connection cable and, for the D/Q series, an LPT connection card for installation in your machine.
WinPC-NC Light with nc100 / WinPC-NC USB with nc100:
You send us back: The nc100 adapter.
We deliver to you: A WinPC-NC NET license, the ncNET module and an Ethernet connection cable. You will also receive a LPT connection cable.
WinPC-NC Light (LPT):
You send us back: The WinPC-NC Light installation CD.
We deliver to you: A WinPC-NC NET license, the ncNET module and an Ethernet connection cable.
WinPC-NC Economy:
You send us back: The WinPC-NC Economy installation CD and the blue license dongle.
We deliver to you: A WinPC-NC NET license, the ncNET module and an Ethernet connection cable.
When upgrading to WinPC-NC NET with ncNET, you will receive the latest version. Further information on the new features and benefits of version 4.1 can be found on the WinPC-NC update to version 4.x product page.
Recommended accessories
Power supply for ncNET
€6.80*
The ncNET module requires an external supply voltage.
This power supply unit is ideal for the ncNET module and is simply connected to the hollow socket of the ncNET module with reverse polarity protection. The cable of the plug-in power supply has a length of 1.5m. Electrical values:
Input voltage: 100-240 VAC
Output voltage: +12VDC
Output current: 1,5A
5-port unmanaged Switch - for ncNET
€33.00*
The ncNET module from WinPC-NC NET can be connected either directly to the control computer or via an existing network hub or switch.If no suitable connection space is available next to the CNC machine, the network can simply be extended plug & play with this unmanaged switch. The switch is specially tested for use with WinPC-NC NET.Details:5x 10/100/1000Mbit/s auto-negotiation RJ45 portsPlug&Play, no configuration necessaryIEEE 802.3x for reliable data flow controlMetal housing for easy installationAuto MDI/MDIX detection, no cross-over cable requiredPacket forwarding rate: 7.4 MBit/sFanlessDimensions 99.8x98x25 mm Scope of delivery:5-port unmanaged network switchOperating instructionsPlug-in power supply unit to supply the network switch3m Ethernet connection cable for the connection from the control computer to the switch
Tip
Handwheel HR-20
€269.00*
The HR-20 handwheel is equipped with a replaceable 3 m cable and USB plug. With the new, more ergonomic housing, the HR-20 fits even better in the hand and can be perfectly stowed away on the CNC machine with the retaining bracket. The axes are conveniently controlled on the HR-20 via a rotary switch. The handwheel is automatically integrated by Windows and only needs to be activated in the WinPC-NC parameters under Basic Settings-interface. Start today and experience a new dimension of machine operation with WinPC-NC and the HR-20 handwheel. The HR-20 handwheel supports the following functions: Selection of all 4 axesVery precise positioning thanks to high-resolution rotary encoder Step-by-step movement with adjustable width Continuous movement as long as it is turned Special speed mode with variable speed Start/stop of loaded jobs Save and approach zero points Switch spindle and cooling on/off Speed and spindle override during job The HR-20 handwheel information sheet can be downloaded here. The HR-20 handwheel can be used with all WinPC-NC versions from version 2.5 or higher.
3D-Probe and Z-Probe Bundle
€229.00*
The sensor 3D-Probe is suitable for use as a 3D probe with WinPC-NC or other control software. With the 3D-Probe, non-planar surfaces can be measured automatically and three-dimensional bodies can be scanned precisely. Further applications are the precise determination of the center of a hole or the probing of the zero point or edges of a workpiece.The probe tip is replaceable and can be reordered individually if required. The probe housing is dust-protected and the probe tip can be mechanically calibrated via three screws.
The Z-Probe surface
and length probe can be used both as a flying probe for determining the
Z zero point and as a permanently installed probe for determining and
correcting tool lengths.
For more information about the auto-levelling function in WinPC-NC with the 3D-Probe, about the probe itself,
on Z zero point determination and the use of a fixed probe with consideration of the workpiece thickness in WinPC-NC, please refer to the Documentation tab.Scope of delivery:3D-ProbeZ-ProbeHolder for 3D-Probe and Z-Probe Spare cover for touch tip made of plasticConnection cable 2m with magnetic connector
25 pole screw terminal for easy connection to control hardware
ncNET Mounting Adapter
€33.00*
The mounting adapter for the ncNET module allows the module to be attached to a din rail / mounting rail or mounting plate. The adapter is robust and stable. Thanks to the precise design, the module is locked in the adapter and cannot be moved. The mounting brackets used for the mounting rail hold firmly on the mounting rail so that installation is possible without end brackets. The mounting brackets can also be removed and the module can be attached to a mounting plate using the adapter and 4 holes.
You can find the right adapter for the ncUSB module here.
25-poliges vorkonfektioniertes Sub-D-Anschlusskabel
€6.40*
Sub-D Ausführung:
Sub-D Stecker/Stecker
Sub-D-Anschlusskabel zum Anschluss von CNC-Steuerung an die CNC-Elektronik. Die Länge beträgt 1,8m.Die Anschlusskabel sind wahlweise mit Sub-D Stecker/Stecker oder Sub-D Stecker/Buchse verfügbar.
Content: 1.8 Meter (€3.56* / 1 Meter)
25 pole screw terminal for DIN rail mounting
€35.00*
For easy connection of signal lines to our controllers or stepper motor cards, we recommend the use of a connection adapter.With this connection adapter for DIN rail mounting in the industrial version, the input and output signals can be wired easily and professionally. With a 25-pole SubD cable, the DIN rail terminal can be connected directly to our controllers and the signals can be tapped at the numbered terminals. The SubD connection is designed as a female connector.
PWM-5V/10V board
€59.00*
Select mounting:
With Din-rail retainer
The PWM-5V/10V board is designed to convert a 5V PWM signal into an analogue 0-5V or 0-10V signal. The conversion is linear. The analogue signal is needed, for example, to control the frequency converters of speed-controlled spindles or the power electronics of engraving lasers. Due to the many configuration options, the board is also suitable for other projects where a PWM signal has to be converted into a pure analogue signal.The operating status of the board is symbolised by two LEDs. The board is specially designed to be plugged between the CNC control and the CNC electronics of the machine. Most signals, such as clock and direction signals, are connected through from the LPT input to the LPT output. However, the PWM signal can also be connected through one of the connectors.The PWM-5V/10V board is offered without a housing. A DIN rail bracket is optionally available. More information and english manual available on request.
Variants from €55.00*
WinPC-NC Version 4 printed manual
€15.00*
A good product also requires precise and comprehensive documentation.The printed and revised manual of WinPC-NC version 4 impresses with its precise description of the individual functions and dialogues and also offers a lot of further and useful information on WinPC-NC. The manual is bound and printed in colour.You will find the WinPC-NC manual with every WinPC-NC installation as a PDF document in the installation directory or for download from our website.